LUMEX Avance-25

LUMEX Avance-25

The World’s First Hybrid Metal 3D Printer (Since2002)

HIGH SPEED

High output fiber laser

Standard500W

Option1kW

The sintering and milling time is shortened by improved powder distribution speed and optimized galvano control / sintering conditions and milling paths. A maximum build speed of 35 cc/h*1*2 can be achieved.

1:The above is the calculation value, not the guaranteed value.

2:Laser output 1 kW

Pre-milling powder suction

By removing metal powder around the built part before the start of milling, a faster cutting feed rate can be used, thereby shortening the milling time.

※Patents relating to “hybrid laser sintering & milling device” used under license from Panasonic Corporation.

LARGE CAPACITY

MAX. WORK SIZE

90kg

Max. work size
W256mm×D256mm×H185mm
Max. work weight
90kg

MAX. WORK SIZE

150kg

Max. work size
W256mm×D256mm×H300mm
Max. work weight
150kg(※H300 mm option)

AUTOMATION

Option

APR System(Automatic Powder Recovery System)

Powder supply, collection and reuse can be fully automated without the need for the operator to directly touch the powder. Excess powder that remains after sintering is automatically sieved and reused for subsequent sintering.

SPEC

 

Hybrid Metal 3D Printer

LUMEX Avance-25

Hybrid Metal 3D Printer

LUMEX Avance-60

Laser oscillator Yb fiber laser Yb fiber laser
Laser Power:W

500Standard

1000Option

1000Standard

Max. Work Size: mm

W256 × D256 × H185

W256 × D256 × H300
Option

W600 × D600 × H500
Max. Part Size: kg

90

150Option

1300
Spindle Speed:min-1 45,000Standard 45,000Standard
Travel(X/Y/Z):mm 260/260/100 610/610/100
Feed Rate(X/Y/Z):m/min 60/60/30 60/60/30
NC System

i-Tech Avance

i-Tech Avance

CONTACT

Page TOP